SV14 Air – Up to 80m²

SolarVenti SV14 is the ‘Most sold model’ jointly with it’s smaller brother SV7. Even though SV 14 delivers approx. 60 – 110 m3 air pr. hour with approx. 25-30 degrees C. temperature rise – compared to air temperature outdoors – the model is still so small, that it typically can be mounted both horizontally or vertically.

There are three SV14 roof versions:
  1. With complete kit for the Fiber Cement (Type1)
  2. With complete mounting kit for roofs with steel, roofing felt, bitumen and Decra. (Type2)
  3. With complete mounting kit for tiling with bricks, cement bricks (contains roof anchors) (Type3)

The Panel filter is maintenance-free.

Find Your Dealer To Buy


Recommended max area of the house in m²: 80 m2  ( 95.68 yd2 square yards )

Maximum air flow – m3/h:  110 m3 ( 143.87 yd3 cubic yards )

Complete replacement of the air in the room: In less than 2 hours

Utilization of solar radiation (Efficiency): 66%

Estimated avarage energy production kWh/m² per year *: 660 kWh

Estimated energy production kWh/SV-unit/year *: 660 kWh

Rise in temperature compared to outdoor temperature: Approx. 30 degrees K  (e.g. from 10o  C to 40o C)

Dimension (panel) in mm: L. x W. x D., excl. package: 2010 x 700 x 55 mm (77.71″ x 27.71″ x 2.16″)

Dimension (panel) in mm: L. x W. x D., incl. package: 2170 x 770 x 150 mm (85.43″ x 30.31″ x 5.9″)

Dimension (roof mountingh kit) in mm: L. x W. x D., incl. package: 790 x 260 x 220 mm (42.52″ x 10.24″ x 8.66″)

Panel size in m²: 1.4 m² ( 1.67 yd² )

Solar cell – watts / power generation: 12 watt

Ventilator – watts / power consumption: 3.4 watt

Weight (panel) – kg, excl. package: 14 kg. ( 17.63 Lb )

Weight (panel) – kg, incl. package: 19 kg. ( 30.86 Lb)

Weight (roof mounting kit) – kg, incl. package: 5 kg ( 11.02 Lb)

Maintenance free (number of years): Up to 15 years

Product warranty: 5 years

Framework (Material): Aluminum (seawater resistant)

Air outlet on collector – Dimensions in mm: 125 mm ( 4.92″ )

Cover plate (transparent): Polycarbonate

Indoor inlet valve in the house: 125 mm ( 4.92″ )

Humidity stopp – to prevent condensation water and back drafts: Yes

Tube for wall mounting, screws etc.: Yes

Cooling and extraction kit with extra solar cell: Yes

Cooling and extraction kit without extra solar cell: No

Roof mounting kit, type 1, for tile etc.: Yes

Roof mounting kit, type 2 for steel plate roof etc.: Yes

Basement mounting kit: Yes

Humidity Stop: Yes

Choose between a the Regulator1, Thermostat SwitchSControl or On/Off switch to control your system.


(* Values are under Danish weather conditions. – Much higher values in countries closer to the equator.)

Additional information

Frame Color

Aluminium, Black, White


Roof (Roof Tile / Fiber Cement), Roof (Steel / Roofing felt), Wall mounting


On/off Switch, Regulator 1