Roof Mounting Kits, Switches etc.
Mounting for Roof SV7/SV14
There are three SV7 / SV14 roof versions:
- With complete kit for the Fiber Cement (Type1)
- With complete mounting kit for roofs with steel, roofing felt, bitumen and Decra. (Type2)
- With complete mounting kit for tiling with bricks, cement bricks (contains roof anchors) (Type3)
Roof mounting kit for installation on roofs. Gives the optimal angle to the sun at 50-65 °.
The kit contains the necessary components (fittings, aluflex tube 175 cm in Ø125, feeder and accessories) to attach and install the SolarVenti on a roof.
.
Find Your Dealer To Buy
Mounting for Roof SV20/SV30
There are three SV20 / SV30 roof versions:
- With complete kit for the Fiber Cement (Type1)
- With complete mounting kit for roofs with steel, roofing felt, bitumen and Decra. (Type2)
- With complete mounting kit for tiling with bricks, cement bricks (contains roof anchors) (Type3)
Roof mounting kit for installation on roofs. Gives the optimal angle to the sun at 50-65 °.
The kit contains the necessary components (fittings, aluflex tube 175 cm in Ø125, feeder and accessories) to attach and install the SolarVenti on a roof.
.
Find Your Dealer To Buy
Regulator1
Regulator1 – Plastic
Type: SV Regulator unit for operation of solar cell
incl. on/off switch, regulator, and thermostat
Material: Alu eloxated Nature/Black plastic
.
Find Your Dealer To Buy
SControl
SControl is an advanced system management suitable for temperature, moisture and time management.
When connected to the power grid, it is able to provide a regular humidified ventilation even when the sun is not shining.
The controller requires at least connection to an air collector and temperature sensor in the air collector.
The system is available in the following variants:
SControl set 1 – Control, solar sensor PT1000
.
SControl set 2 – Control, solar sensor PT1000, 12V power supply
.
SControl set 2CC – for cooling
.
SControl set 3 (for cellular systems) – Control, solar sensor PT1000, 12V power supply, combi cooler
.
SControl set 4 – Control, solar sensor PT1000, 12V power supply, 2 pcs. Combination sensor
.
SControl set 5 – Control, solar sensor PT1000, 12V power supply, 2 pcs. Combi fan, room sensor (temp.)
Humidity stop ø125
Description:
Patent app. ”Humidity stop”, which also function as a counter valve.
Besides beeing less expencive than a traditional counter valve you get more advantages:
- Prevents flow of air from the house back into the collector
- Decreases wind draft from outside (from the collector when it is not in operation )
- Humidity Stop makes no noise
- Prevents condensation dripping from the valve if there are pipes on a cold loft
- Prevents intake of dust during a building process
- Made of stainless spring steel. The material is extremely strong, heat resistant and flexible
The Humidity stop is now standard in all SolarVenti systems.